In the actual operation of the equipment, the transmission of the automatic feeding mixer is also a very important part. Therefore, it is necessary to check the oil quality to a certain extent during use. How to operate?
1. stop the automatic feeding mixer on the horizontal ground and tighten the hand brake.
2. let the engine idle for several minutes.
3. press the brake pedal, move the control lever to reverse gear, forward gear, etc., and stay in each gear for a few seconds to fill the hydraulic torque converter and all shift actuators with hydraulic oil. Then move the lever to the park position.
4. pull out the automatic transmission dipstick from the filler pipe, insert all cleaned dipsticks into the filler pipe, pull them out, and check the oil level on the dipstick.
Before checking or troubleshooting the driving device of the mixer, please check the oil level and quality of the driving device. Place the shifter in P gear and allow the engine to idle for at least a few minutes. The engine oil reaches the normal operating temperature, and the car must be stopped on a level road to ensure that the oil level between the differential and transmission oil is high, and the transmission is normal and stable.
The wide application of automatic feeding mixer not only saves the construction time, but also reduces the labor cost. The automatic feeding mixer plays a connecting role in the whole process, which is not only as simple as improving the construction efficiency, but also for urban construction. It is also conducive to protecting the environment and promoting the green development of society.
So if you need to purchase, please follow our website tjjh.net, various models for you to choose!